An outfit with morphing skirt and jacket for Victoria 3. Important: This item requires a separate texture map file download that will be automatically added to your cart at no additional charge, please unzip all product download files to the same runtime.

Japanese School Uniform for Terai Yuki 2 Set contains Shoes with socks, Skirt and Top, the Skirt can be used Conforming or Dynamic. Important: This item requires a separate texture map file download that will be automatically added to your cart at no additional charge, please unzip all product download files to the same runtime.

Jeans for Stephanie 3 that can be opened

Mules to fit all Figures listed below

The classic light brown striped suit for David is a real suit fabric textures, has jacket and pants with gold belt buckle and include the real black leather texture shoes. Includes MATS.

All textures and bumps are included

All textures and bumps are included

for David (Poser / DAZ 3D David), requires M3Catsuit for David that will be automatically added to your cart at no additional charge, please unzip all product download files to the same runtime.

The 3D porch glider furniture model for Poser and DAZ Studio includes a morph to slide / glide the swing forwards and backwards. This model took 6 hours to model and texture.

The stove and oven combo appliance is a new addition to our Poser World kitchen props. The door and drawer have open movements and can be found under "figures" once installed. Also comes with additional textures: Avacodo, Brown, Gold and White (as shown).

The 3D house key models for Poser and DAZ Studio are parented to the key ring and work well in nearly any scene that needs small personal item models in them.

The download contains a Telecaster style guitar prop

The 3D morphing beer much Poser and DAZ Studio prop has morphs to change the liquid and foam levels, the foam can also be removed as it is separate from the liquid.

This is a set consisting of pants, shirt and jacket. The jacket is the same as the Victoria 3 version but the pants and shirt are designed especially for Jessi

A pair of loafers to fit Laura, Miki 2, Stephanie 3, Victoria 3 and Victoria 4. The shoes come with 5 texture files and MATs, 2 of the textures are grey so you can add color in the material room to get any color shoe you want.

Briefs and boxer shorts for Mike 3. Just added a morph to lift the band of the briefs higher

Zoot Suit for Michael 4 (M4)

Command your Red Private, Rifle Division and Red Army Infantry Uniforms for Poser / DAZ 3D A3. Important: This item requires a separate texture map file download that will be automatically added to your cart at no additional charge, please unzip all product download files to the same runtime.

5 photos from Paris at 1152x864

The angelic cute party dress fits Laura, Kate 2 and Stephanie 3. Real fabric photo texture and includes MATS.

The Lavender Paisley and Denim Metro outfit are read fabric textures and include dark purple (real) suede footwear. Fits: G2 Female, Laura, Stephanie 3 and Victoria 3. Has finished seams and edges. Includes MATS.

The 3D outdoor billboard sign model for Poser and DAZ Studio is a fully scaled model and is a new addition to our other outdoor 3D models. There are texture templates in the texture folder so that the sign can be changed to suit your needs. This model took 15 hours to model and texture and is a Poser World member requested model.

Click here

Pauline gets a pair of basic dynamic dresses, these are very easy to use and perfect for the first time cloth room user.

For DAZ's Michael

The digital DSLR Poser / DAZ studio camera prop has very detail textures and is ready to go in any scene.

The leather fashion pure Poser / DAZ studio prop has real leather textures. It is already set and scaled for Victoria 4, but can be used with any Poser or DAZ 3D figure. There is a morph for the should strap to lengthen it a bit.

The reading glasses are already set and scale for DAZ Michael 4. However they can be scaled and used with any Poser or DAZ 3D figure.

Click here

The seamless digital royal period fabric pack contains 15 rough woven, distressed fabric textures. Perfect for under garments, robes, tapestry, floor coverings, etc. 150dpi, 512x512 pixels.

The seamless rock wall photo textures contains 8 large rock walls and includes height maps.

The seamless women's fabric photo textures set are real photos and are 100% tileable. 3000x3000 pixels. This set contains 13 textures: Teddy bear Pattern, Blue Embroidered, Blue Striped, Dark Blue Striped, Floral Pattern, Green With Silver Thread, Light Blue Stretch, Multi Color Stretch, Pink Embroidered, Pink Lacy, Pink With Bears, Purple and Green Plaid, Red and Blue Plaid.Packaged individually due the large file sizes. This is a merchant resource and can be used for personal or commercial use.  File sizes are 5 to 11 megabytes each.The previews are at 50% reduced zoom.

The seamless women's fabric photo textures set are real photos and are 100% tileable. 3000x3000 pixels. This set contains 13 textures: Teddy bear Pattern, Blue Embroidered, Blue Striped, Dark Blue Striped, Floral Pattern, Green With Silver Thread, Light Blue Stretch, Multi Color Stretch, Pink Embroidered, Pink Lacy, Pink With Bears, Purple and Green Plaid, Red and Blue Plaid.Packaged individually due the large file sizes. This is a merchant resource and can be used for personal or commercial use.  File sizes are 5 to 11 megabytes each.The previews are at 50% reduced zoom.

The men's fabric photo textures are all real fabrics, are 3000x3000 pixels (6-10mb each) and are 100% tileable. This set contains: Blue & White Shirt Fabric, Brown Plaid Suit Fabric, Dark Small Pinstripe Fabric, Grey Striped Men's Suit Fabric, Gray Patterned Wool Fabric, Light Brown Plaid Suit Fabric, Multi-Color Striped Shirt Fabric, Tweed, Wool Houndstooth Suit Fabric. Packaged individually due the large file sizes. This is a merchant resource and can be used for personal or commercial use.

A Xmas room with decorated tree, all parts can be used separate.

5 new textures sets for CIPP. Need more than just military strength? the new CIPP models are specialised for emergency medical assistance, law enforcement backup, hazardous material disposal, security, and construction

The 3D Poser and DAZ Studio bicycle built for two has working steering, the wheels spin, the sprockets and foot pedals spin (separately of each other) and the seats can be raised and lowered. Perfect for any 3D outdoor scene or render.

Special Forces Uniform for V 1& V2 Important: This item requires a separate texture map file download that will be automatically added to your cart at no additional charge, please unzip all product download files to the same runtime.

The raw silk dress texture has a bump map. Both the raw silk and off gold pattern dress textures are real fabric photo textures with finished seams and edges. Includes MATS.

The 3D tailor's dress stand for DAZ Victoria 4 is set up as a figure. Add Victoria 4 clothing and it will be fitted to the stand, if you want to move the stand just conform the clothing (or parent if dynamic). This model took 6 hours to model. This is a member requested item.

A Summer dress for Victoria 4, this item has Full body morphs as well as movement morphs

The pink lace flowery underwear comes as a solid and a see-though version. Real fabric photo textures and includes TransMap and MATS.

Battleship U.S.S Tennessee BB-43 for Poser is a highly detailed WWII model figure for the Poser 3D art and animation rendering software. USS Tennessee (BB-43) was the lead ship of her class of battleship, was the third ship of the United States Navy named in honor of the 16th US state. During World War II in the Pacific Theater, she was damaged during the attack on Pearl Harbor in December 1941. Included are the main USS Tennessee figure, 3 smart-propped versions of the Anchors (all anchors up, single anchor lowered, and all anchors lowered), and 2 smart-propped O3U Corsair Float-planes. Optionally the Anchors may be left out for replacement by other props (such as the available “easy pose” chains and extra items of that nature available from many sources) as can the Aircraft. Pose-able features (some 70 moving parts in total) include: working Rudder and Propellers, Main and Secondary Gun Turrets that can rotate with Barrels that can elevate independently, working Cargo Cranes, functioning Spot-lights and Gun Directors, and pose-able Aircraft Catapults and Crane.

Tugboat USS Navajo for Poser 3d Software and DAZ 3D Studio (runtime). USS Navajo (AT-64) was the lead ship of her class of the Cherokee class US Navy Tugboats. Originally known as the Navajo class, the fleet of Cherokee class tugs were built for the United States Navy prior to the start of World War II. They represented a radical departure from previous ocean-going tug designs, and were far more capable of extended open ocean travel than their predecessors. This was due in large part to their 205 feet (62 m) length, 38 feet (12 m) beam, and substantial fuel-carrying capacity. They were also the first large surface vessels in the US Navy to be equipped with diesel/electric drive. This 3d model for Poser 3D SOftware features include with the main USS Navajo figure, and 3 smart-propped versions of the Anchors (all anchors up, single anchor lowered, and all anchors lowered). Optionally the Anchors may be left out for replacement by other props (such as the available "easy pose" chains and extra items of that nature available from many sources). Pose-able features include: working Rudder and Propellers, Main and Secondary Gun Turrets that can rotate with Barrels that can elevate independently, working Deck Crane, and functioning Spot-lights.

A-7D/E Corsair II Navy jet aircraft for Poser is a highly detailed historical aircraft figure for the Poser 3D art and animation rendering software. The LTV A-7D Corsair II, a carrier-capable subsonic light attack aircraft, was developed to replace the Douglas A-4 Skyhawk and derived from the Vought F-8 Crusader. This jet, serving both the US Air Force and Navy from the Vietnam War up to the Gulf War, was designed for close air support, interdiction, and armed reconnaissance missions. Key features include a single-seat configuration, a high wing, low horizontal tail, and a chin inlet, with the A-7D specifically incorporating a more powerful Allison TF41-A-2 turbofan engine. The aircraft also featured advanced avionics, including a heads-up display (HUD) and a computerized navigation and bombing system, enhancing its operational capabilities. Here are some of the highlights of this Poser figure: * Over 50 Points of Articulation on the main figure! * Moving Flaps, Ailerons, Spoilers, Rudder. Stabilator, Speed Brakes, Opening Landing Gear Doors, Raising and Lowering Gear, Spin-able Wheels, Steer-able Nose Gear, Opening Canopies, Deployable Slats, Folding Wings, Deployable Tail Hook, Deployable Emergency Drag Chute, Fully Functional Cockpit Flight Controls, and Working Ejection Seat... * Numerous ERC dials for ease of control from one main location, including dials for various basic flight maneuvers. The weapons sets also have ERC controls for ease of use in images and animation! * Nose Radome opens to reveal the AN/APQ Radar Set. * Conforming Dummy Aircrew figure to use to place a Flight Crew in the Cockpit. * Conforming Crew Boarding Ladders and FOD Storage Covers for the Engine and Air Intake. * 12 Separate Conforming Weapons sets designed to be Mixed and Matched to create multiple load-outs for the Weapons most commonly carried by the A7 Corsair, with fully controllable ordinance deployment. These Sets are broken down by mounting location so that each set can be properly mix and matched with the others, allowing a total combination of over 100 variations of weapons loads that can be loaded based on mission requirements! * Note: All of this product`s content was created by "theschell" (Christopher D. Schell) with additional help with ERC controls, Poser MAT Files & Additional Texturing by Mark A. Fares (KageRyu). My thanks to Mark for his extra hard work on this figure!

F-8E Crusader for Poser is a highly detailed historical aircraft figure for the Poser 3D art and animation rendering software. The F-8E Crusader, a carrier-capable supersonic fighter jet, was designed to meet the US Navy's requirements for a high-speed, high-maneuverability aircraft. It was armed with four 20mm cannons and could carry a variety of air-to-air missiles, making it a formidable dogfighter during the Vietnam War. The Crusader's distinctive design featured a high-wing configuration and a variable-incidence wing to facilitate carrier landings, while its powerful Pratt & Whitney J57 turbojet engine allowed for a top speed of Mach 1.53. The F-8E Crusader served with distinction in the US Navy and the French Navy, earning it the title "The Last of the Gunfighters" for its primary use of guns in combat. Key Features: * Over 50 Points of Articulation on the main figure! * Moving Flaps, Ailerons, Spoilers, Rudder. Stabilator, Speed Brakes, Opening Landing Gear Doors, Raising and Lowering Gear, Spin-able Wheels, Steer-able Nose Gear, Opening Canopies, Deployable Slats, Folding Wings, Deployable Tail Hook, Deployable Emergency Drag Chute, Fully Functional Cockpit Flight Controls, and Working Ejection Seats... * Numerous ERC dials for ease of control from one main location, including dials for various basic flight maneuvers. The weapons sets also have ERC controls for ease of use in images and animation! * Nose Radome opens to reveal the AN/APQ Radar Set. * Conforming Dummy Aircrew figure to use to place a Flight Crew in the Cockpit. * Conforming Crew Boarding Ladders and FOD Storage Covers for the Engines and Air Intakes. * 14 Separate Conforming Weapons sets designed to be Mixed and Matched to create multiple load-outs for the Weapons most commonly carried by the F4 Phantom, with fully controllable ordinance deployment. These Sets are broken down by mounting location so that each set can be properly mix and matched with the others, allowing a total combination of over 100 variations of weapons loads that can be loaded based on mission requirements! * Note: All of this product`s content was created by "theschell" (Christopher D. Schell) with additional help with ERC controls, Poser MAT Files & Additional Texturing by Mark A. Fares (KageRyu). My thanks to Mark for his extra hard work on this figure!

UNS Coral Sea Space Carrier for Poser is a highly detailed fictional spacecraft figure for the Poser 3D art and animation rendering software. Knowing that the Solinoid fleet would eventually arrive, the UN Military began design studies to incorporate reverse engineered Solinoid technology into various vehicles and vessels. At first, the reverse engineered parts were too large to be fitted into smaller vehicles like aircraft, and required too much power to operate. It was necessary to fit the tech to larger vessels. Experiments were conducted on various decommissioned Naval vessels to find the best way to design and incorporate the new technologies. Once various systems and power management issues had been worked out, the UN quickly implemented a build program to construct Naval warships capable of both atmosphere and space operations. The first such vessels were based upon rebuilt Nuclear Aircraft Carrier hulls, as these ships could provide enough power to meet the energy needs of the Solinoid technology. The UNS Coral Sea is the first of the new breed rebuilt Space Carriers, based on the reconstructed hulls of the retired Midway Class Aircraft Carriers decommissioned by the US Navy. Refitted for Nuclear Fusion Power, and redesigned for Space operations, the UN has 1 more of the class under construction (there had been 3 Midway class ships but one was scrapped years before the discovery of the Solinoids) along with smaller Escort Carrier, Cruiser and Destroyer type ships. Here are some of the highlights: • Over 100 Points of Articulation on the main figure! • Over 50 individually pose-able Weapons Turrets that can be trained and elevated independently. • Working Aircraft Elevators, Hangar Bay Doors, Jet Blast Deflectors, Rudders, Weapons Mounts and Hangar Gantry Cranes with pose-able Hoist Hooks. • Detailed Interiors for the Forward and Rear Hangar Decks, and the Command Bridge. • Pose presets to adjust the scale to Life-sized and back to the Default 1/10th scale to allow users to scale the carrier to match the life-sized scale of my transforming Variable Geometry Fighters. • Includes cr2`s to load both the UNS Coral Sea, and her sister ship the UNS Midway. * Note: All of this product`s content was created by "theschell" (Christopher D. Schell) with additional help with ERC controls, Poser MAT Files & Additional Texturing by Mark A. Fares (KageRyu). My thanks to Mark for his extra hard work on this figure!

Solinoid Vendrik Spacecraft for Poser is a highly detailed fictional spacecraft figure for the Poser 3D art and animation rendering software. The Solinoid Vendrik is the mainstay of the Solinoid Fleet. Unable to access fold-space under its own power, the Vendrik is only found in the company of Solinoid Fleet vessels and must be carried into battle aboard a larger ship. Deployed in the 100`s from Solinoid Hive Carriers, the Vendrik is small, nimble, and deadly. Here are some of the highlights: • Over 15 Points of Articulation on the main figure! • Raising and Lowering Gear, Opening Canopies, fully independently controllable missiles, and much more... • Separate Conforming Figure Weapons and Ordinance, with fully controllable ordinance deployment. (Some sold as separate packs) • Over 50 Independent ERC controls on the main figure for complete control of most vital functions from 1 location. • Independent ERC controls for each moving part. • Articulated Landing gear with co-ordinated ERC for 1 dial raise and lower. • ERC weapons controls for launching and steer-able missiles and ordinance. • Pre-Posed Poses for various flight and landing positions. *Note: All of this product`s content was created by "theschell" (Christopher D. Schell) with additional help with ERC controls, Poser MAT Files & Additional Texturing by Mark A. Fares (KageRyu). My thanks to Mark for his extra hard work on this figure

Solinoid Arcuilaria Space Carrier for Poser is a highly detailed fictional spacecraft figure for the Poser 3D art and animation rendering software. The largest of the Solinoid Fleet ships, the Arcuilaria Hive Carrier (Codenamed Chrysalis Hive by UN Forces) is a massive vessel with incredible destructive power. Armed with numerous Beam Cannons, Tri-barreled Laser weapons, and a massive Focused Beam Array weapon, the Hive Carrier can deliver unparalleled destruction to its target. The Arcuilaria is also home to a Solinoid Hive Queen and her swarms. The Hive Queen has her own separate nest atop the hull of the Arcuilaria in a bridge-like structure, and the hull houses swarms of Solinoid Worker Drones, advance bio-engineered Human-oid Clones, and egg chambers. The Solinoid Arcuilaria has space in its pod-like Hangar Bays for 100`s of Vendrik and Mogwai Fighters, and can launch them in massive swarms at any enemy it faces. Within the huge Hangar Pods, the Solinoid Fighter swarms are maintained in a state of stasis awaiting an order to awaken from the Queen. The Arquilaria class also acts as a sort of Fleet Command and Control ship, and can call on the resources of her escorts, as well as commanding her own assets. Serving as Division Flag-ships, the Arcuilaria is never encountered without a host of smaller support vessels near by. The UN Military has counted dozens of the class in the Solinoid Main Fleet, among hundreds of smaller Vessels. It is feared that even larger vessels may remain out of sight beyond the edges of our solar system. Here are some of the highlights: • Over 100 Points of Articulation on the main figure! • Over 70 individually pose-able Weapons Turrets that can be trained and elevated independently. • Working Main Cannon, Beam and Tri-barrel Turrets, and Hangar Pods • Detailed Interiors for the Hangar Pods, and the Command Bridge. • Pose presets to adjust the scale to Life-sized and back to the Default 1/10th scale to allow users to scale the carrier to match the life-sized scale of my transforming Variable Geometry Fighters. *Note: All of this product`s content was created by "theschell" (Christopher D. Schell) with additional help with ERC controls, Poser MAT Files & Additional Texturing by Mark A. Fares (KageRyu). My thanks to Mark for his extra hard work on this figure!

Battleship U.S.S Nevada BB-36 for Poser is a highly detailed WWII model figure for the Poser 3D art and animation rendering software. USS Nevada (BB-36), is the second United States Navy ship to be named after the 36th state, and was the lead ship of the two Nevada-class battleships; her sister ship was Oklahoma. Launched in 1914, the Nevada was a leap forward in dreadnought technology; four of her new features would be included on almost every subsequent US battleship: triple gun turrets, oil in place of coal for fuel, geared steam turbines for greater range, and the "all or nothing" armor principle. These features made Nevada the first US Navy "super-dreadnought". Included are the main USS Nevada figure, 3 smart-propped versions of the Anchors (all anchors up, single anchor lowered, and all anchors lowered), and 2 smart-propped O3U Corsair Float-planes. Optionally the Anchors may be left out for replacement by other props (such as the available "easy pose" chains and extra items of that nature available from many sources) as can the Aircraft… Pose-able features (some 70 moving parts in total) include: working Rudder and Propellers, Main and Secondary Gun Turrets that can rotate with Barrels that can elevate independently, working Cargo Cranes, functioning Spot-lights and Gun Directors, and pose-able Aircraft Catapults and Crane.

Battleship U.S.S Maryland BB-46 for Poser is a highly detailed WWII model figure for the Poser 3D art and animation rendering software. USS Maryland (BB-46), also known as "Old Mary" or "Fighting Mary" to her crewmates, was a Colorado-class battleship. She was the third ship of the United States Navy to be named in honor of the seventh state. She was commissioned in 1921 and, serving as the flagship of the fleet, cruised to Australia, New Zealand and Brazil. Included are the main USS Maryland figure, 3 smart-propped versions of the Anchors (all anchors up, single anchor lowered, and all anchors lowered), and 2 smart-propped O3U Corsair Float-planes. Optionally the Anchors may be left out for replacement by other props (such as the available "easy pose" chains and extra items of that nature available from many sources) as can the Aircraft . Pose-able features (some 70 moving parts in total) include: working Rudder and Propellers, Main and Secondary Gun Turrets that can rotate with Barrels that can elevate independently, working Cargo Cranes, functioning Spot-lights and Gun Directors, and pose-able Aircraft Catapults and Crane.